fore plane

When the fore plane is made longer, as for planing long joints, it is termed a jointer plane, the length being as much as 30 inches and the blade 25⁄8 inches wide.

The Plane.—The jack plane and the fore plane are handled with both hands, and the smoothing plane with one hand, but only when used for dressing the ends of boards.

The face of the fore plane must be kept perfectly flat on the underside, which should be square with the sides of the plane.

On the other hand, the fore plane should invariably be used for straightening the edges of boards, or for fine surfacing purposes.

The fore plane should always be held straight with the movement of the plane, because the length of the fore plane body is used as a straightener for the surface to be finished.